Glock 43X MOS Red Dot: What Fits and What Your Holster Needs to Clear
Share
The fastest way to waste a weekend with a Glock 43X MOS is to buy the red dot first and read the footprint second. This slide is not the full-size Glock MOS system, and a lot of popular micro red dots will not sit on it without the right plate. Even once the optic is on, you have a second question that most red dot guides skip entirely: does your holster clear what you just bolted to the slide?
This guide covers both halves, because they are really one decision.
The Glock 43X MOS takes optics with the Shield RMSc footprint directly. Holosun K-series optics like the 407K and 507K fit with an adapter plate, and RMR-footprint optics fit with a different plate. Whatever you choose, your holster needs an optics cut that clears the optic and plate together, and the only way to know is to match the holster to your exact setup.
Why the 43X MOS is pickier than other Glock MOS models
Glock announced the optic-ready Slimline models in August 2020, adding a milled slide cut and a slim rail to the 43X and 48. In that announcement, Glock noted that the Slimline MOS models use a non-standard footprint, so they need specific micro reflex optics, with the Shield RMSc as the example. Retail fitment guides describe the cut the same way: the factory Slimline MOS cut is effectively an RMSc footprint.
That is the whole story in one sentence. If your optic does not use that footprint, you need a plate that converts it. If it does, you bolt it on.

One more point worth knowing: the standard 43X does not have this cut. If you are shopping for a red dot because you own a regular 43X, you are looking at slide milling, not a simple mount. The rest of this guide assumes you own the MOS version. If you are still deciding between the two, Is the Glock 43X the Best EDC Gun? covers why this frame works so well for everyday carry.
Footprints at a glance
|
Optic family |
Footprint |
Plate needed? |
|
Shield RMSc and true RMSc optics |
RMSc |
No, direct mount |
|
Osight S, SE and K |
RMSc |
No, direct mount per retailer fitment guide |
|
Holosun 407K, 507K, EPS, EPS Carry |
Holosun K (modified RMSc) |
Yes, K-series plate |
|
Trijicon RMR, SRO, Holosun 407C, 507C, 508T |
RMR |
Yes, RMR plate |
Always confirm against the manufacturer’s current fitment information before you order. Plates are specific to the optic footprint, so the plate that works for a 507K will not work for an RMR.
Which red dots fit the Glock 43X MOS
Shield RMSc and other true RMSc optics
This is the cleanest path. Because Glock built the cut around the RMSc footprint, an RMSc optic mounts directly with no plate stack. That keeps the optic as low as it can sit on this slide, which helps both sight picture and holster fit.
Osight is another name in this category. Their S, SE and K optics use a true RMSc footprint, so per one retailer’s fitment guide, none of them needs an adapter plate on a 43X MOS or 48 MOS. The guide also points out that Holosun’s K series is the opposite case.
Holosun K series (407K, 507K, EPS Carry)
The Holosun K series is the most searched group for this gun, and it is a modified RMSc footprint, which means it needs a plate on the factory Glock cut. Several companies make them. Holosun sells its own adapter plate for the 407K and 507K on the 43X MOS and 48 MOS, and Calculated Kinetics makes one that lists the 407K, 507K, EPS and EPS Carry. If you go this route, buy the plate made for your exact optic, and use the screws and thread locker that come with it.
RMR-footprint optics
If you already own or prefer an optic on the RMR footprint, a plate exists for that too. C&H Precision lists an RMR-footprint plate for the 43X and 48 that covers the Trijicon RMR and SRO along with several Holosun C-series models. The tradeoff is height. An RMR-style optic is larger than the RMSc class, and a bigger optic on a plate rides higher on a slim slide, which matters on a gun you are going to carry inside the waistband.
Choosing between them
A few practical questions sort most of this out:
-
Open or enclosed emitter? Enclosed designs keep debris out of the emitter, which is a real consideration for something that spends all day against your body. Open designs tend to be slimmer.
-
How much total height are you adding? Plate plus optic is the number that matters for the holster, not the optic alone.
-
Do you already own a plate or optic? Match the plate to the optic you have rather than buying a second optic to fit a plate.
-
Do you want the Glock 48 MOS to share your setup? Holosun’s plate listing covers both guns, so one plate can serve either slide.
Mounting and zeroing, briefly
Install the plate first, then the optic. Follow the plate maker’s torque spec, because aluminum plates and small screws are easy to strip. One manufacturer’s plate listing calls for torque up to 1.36 Nm, and kits typically include thread locker for a reason. Check the screws periodically after you start shooting, and re-zero any time you change the optic, the plate, or the ammunition you plan to carry. Cheap practice ammo is how you earn the time to do this properly, and 9mm range ammo keeps the cost of getting confident reasonable.

What your holster needs to clear
This is the half of the decision that most guides leave out. The optic does not live in a vacuum. It lives in a holster, and a holster that was not built to leave room above the slide can press on the optic, shift it, or pack lint against the window.
Here is what an optic-ready holster has to account for on a 43X MOS:
The top of the slide. Nothing in the holster should rest on the optic. Retention should come from the trigger guard and the pistol’s body, not from the optic housing.
The plate and optic together. If you use a plate, the total height is the sum of both. Two people with the same optic on different plates can have different holster needs.
The sights. Some shooters add taller sights alongside or beneath the dot. Taller sights need a holster with a sight channel that has the clearance to match.
The muzzle end. If you run a compensator or a threaded barrel, you want an open muzzle design so the holster does not interfere.
The rail. The 43X MOS also has a slim accessory rail. If you plan to mount a light there, that is a separate fit decision, and the holsters covered below are not built for rail-mounted lights or lasers. Decide before you buy rather than after.
What CYA lists for the Glock 43X MOS
CYA’s three Glock 43X IWB holsters all list the 43X MOS as a compatible model and offer an optics-ready cut as an option. Here is what each product page says, with nothing added on top.
The BASE IWB lists “Glock 43X & Glock 43X MOS” under compatible models. It offers an Optics Ready cut or a No Optics cut, and the page says the optics cut works with or without an optic, so you can buy it now and add the dot later. It is not compatible with the claw attachment, light or laser rail attachments, or front suppressor sights. It carries a 4.9 out of 5 rating across 56 reviews.
The RIDGE IWB also lists both the 43X and the 43X MOS. It has an optics cut, an open muzzle for compensators and threaded barrels, and a raised sight channel for look-through and suppressor sights. It lists weapon-mounted lights and lasers as not compatible. It carries a 4.9 out of 5 rating across 15 reviews.
The PATH IWB lists the 43X MOS, offers an Optics Ready cut, has an open muzzle, and describes a high clearance sight channel for suppressor and co-witness sights. It also lists weapon-mounted lights and lasers as not compatible. It carries a 4.8 out of 5 rating across 12 reviews.
The one thing the pages do not publish is a list of specific optic and plate combinations. So before you order, send CYA your exact optic and plate through the contact page and confirm the fit. That is a thirty-second email, and it beats finding out after the box arrives. The Holster Finder can help you narrow the model first.
Here is how some buyers describe these holsters in their own words.
“Great, comfortable fit. Fits raised sights, optics ready all around a great IWB holster. I’ve been a long time user of CYA products and won’t use anything else!” Alonzo S., verified buyer, on the Glock 43X Ridge IWB
“I have purchased several of these holsters for different firearms and am completely satisfied with this product. I carry daily and require a holster that is adjustable for retention, draw/carry angle, holds the firearm securely and prints minimally.” Michael R., verified buyer, on the Glock 43X BASE IWB
“Great holster with great retention. Very easy to manipulate and tweak to your specific needs.” Chandler, on the Glock 43X Ridge IWB
Choosing between BASE, RIDGE and PATH
All three are molded for the 43X on the real pistol and made from 0.080 inch Boltaron, a thermoplastic in the same family as Kydex. The differences are in what they let you adjust and carry.
BASE is the simplest and the lowest price. It suits shooters who want a reliable, adjustable holster without extras, and it is the one to skip if you plan to run front suppressor sights, since the page lists those as not compatible.
RIDGE adds the removable concealment claw, the metal monoblock clip, and the raised sight channel. If you want to run taller sights with your dot, this is the one to look at.
PATH adds adjustable ride height and wide cant adjustment, so it suits shooters who want to dial in exactly where the gun sits. If comfort tuning is the point, see What Makes a Holster Comfortable first.
Carry position, belt and printing
A red dot adds a little bulk to the top of the slide, and where you carry changes how much you notice it. If you carry at the appendix position, Appendix Carry vs Strong Side walks through what hides and what prints. A stiff belt makes any holster work better, and How Your Belt Impacts Concealed Carry explains why. If printing is your main concern, How to Prevent Printing When Concealed Carrying has the fixes, and the sweat guard guide covers keeping an optic gun comfortable through a full day.
For a broader look at fit across other holster styles, Best IWB Holster: Stop Buying the List, Start Buying the Fit makes the case for choosing on fit first.
So which red dot should you buy?
If you want the lowest, cleanest setup, start with an RMSc-footprint optic, because it mounts direct and keeps total height down. If you prefer the Holosun K series, plan on a plate and budget for it. If you already own an RMR-footprint optic and want to use it, a plate makes that possible, but expect a taller setup.
Then choose the holster for the whole stack, not the gun alone. The Glock 43X Ridge, BASE and PATH are the places to start, and the full Glock IWB collection is there if you carry more than one model. If you own a Glock 48 MOS as well, the Glock 48 Ridge IWB is its own mold, because the longer slide changes the fit.
Frequently asked questions
What red dot fits the Glock 43X MOS?
Optics with the Shield RMSc footprint mount directly. Holosun K-series optics such as the 407K and 507K fit with a K-series adapter plate, and RMR-footprint optics fit with an RMR plate. Match the plate to your exact optic.
Do I need an adapter plate for a Holosun 507K on a 43X MOS?
Yes. The 507K uses the Holosun K footprint, which is a modified RMSc pattern, and the factory Glock cut needs a plate to accept it. Plates from Holosun, Calculated Kinetics and C&H Precision list this optic.
Can I put a red dot on a standard Glock 43X?
Not without modifying the slide. The factory optic cut is a feature of the MOS model. Glock’s announcement describes the MOS version as the one with the milled cutout.
Will a regular 43X holster work on a 43X MOS?
CYA lists the Base, Ridge and Path holsters as compatible with both the 43X and the 43X MOS. If you run a red dot, choose the Optics Ready option, and confirm your specific optic and plate with CYA before ordering.
Does an optic-ready holster work if I do not have a red dot yet?
CYA’s product pages say the optics cut is compatible with or without optics, so you can order it now and add the dot later.
Can I use these holsters with a weapon light on the rail?
No. The BASE page says it will not fit light or laser rail attachments, and the RIDGE and PATH pages list weapon-mounted lights and lasers as not compatible.
Do the same plates fit the Glock 48 MOS?
Holosun’s plate listing covers both the 43X MOS and the 48 MOS, and the C&H plates list both guns. The holsters are not interchangeable, though, because the 48 has a longer slide.
Justin Hunold
Firearms Writer and Firearms Expert
Justin Hunold is a firearms writer and lifelong shooter who spent more than ten years behind the gun counter at Bass Pro Shops and Dick's Sporting Goods, helping thousands of customers — first-time handgun buyers, everyday concealed carriers, hunters, competitive shooters, and law enforcement officers — find the firearm and gear that actually fit their needs.